Well the wire schematic shows a shielded cable and my 92 has a shielded cable, but it's not easily visible on the sensor end of the cable it has shrink tube covering it and only the center conductor connects to the KNS, the shield only connects at the computer side. It's used only for RF/EMI shielding.

The KNS produces a frequency type signal and is vulnerable to noise and interference, the shielded cable helps to eliminate the interaction with stray RF and EMI from other surrounding circuits, It's very important that that shield has a good ground for the KNS signal to be interpreted properly.

If you look closer at the KNS circuit at the computer you will see it is shielded, just may be coved with shrink tube.

Chucky MoMo <img src="/forums/images/graemlins/wink.gif" alt="" />