Well I finally had sucess!!! The broke bolt is out!!!! Wasn't that hard. I drilled in the center of the broke stud, starting with a small bit then working my way up to a size that was big and deep enough for me to get the reverse bit in it. I did have to find a socket that would fit it cause it was to deep to use to the tap. I used a socket instead and once it grabbed it came out nice and easy. The threads are fine as well!!

I can email you a pic of the "tool" i used if you want. Just P.M. me with your email. Sent you a P.M. as well.

Tomorrow I can tell you how much my stock head bolts stretched ((16 new head bolts came in for the tune of $100)