Motor surges when applying brakes

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Motor surges when applying brakes #696728 02/15/06 12:04 AM

Joined: Dec 2005

Posts: 19

Louisiana

yotadiehard Offline

Need a Spot

Got a 88'Pickup with a 22R EFI. The motor starts surging when you press the brakes and quits when you release them. Checked the vacum and it seemed to be pulling ok. has any one else seen this. Any suggestions?

Entire Thread
Subject	Posted By	Posted
Motor surges when applying brakes	yotadiehard	02/15/06 12:04 AM
Re: Motor surges when applying brakes	willzrunna96	02/15/06 12:35 AM
Re: Motor surges when applying brakes	4Crawler	02/15/06 12:37 AM
Re: Motor surges when applying brakes	yotadiehard	02/15/06 03:17 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.979s Queries: 15 (5.977s) Memory: 0.5979 MB (Peak: 0.6309 MB) Data Comp: Off Server Time: 2026-06-21 09:45:53 UTC
Valid HTML 5 and Valid CSS