Interchange Gen1 EFI pump w/ carbie tank?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Interchange Gen1 EFI pump w/ carbie tank? #696818 02/15/06 03:59 AM

Joined: Jul 2004

Posts: 62

milwaukee, wi

franklynberry Offline

Getting the Wheeling Fever

Does anyone know if a '89 or later V6 "in tank" pump will fit in the sender opening of an /88 carbie tank?

Just a wild thought. I need an update, and this might be one option.

--frankb

'88 SWB 5-speed Megasuirt MS-II V3 Starion TBI N/A 650/950cc Injectors 4Runner Alloys 275-70R16

Entire Thread
Subject	Posted By	Posted
Interchange Gen1 EFI pump w/ carbie tank?	franklynberry	02/15/06 03:59 AM
Re: Interchange Gen1 EFI pump w/ carbie tank?	JAVYPRO	02/15/06 05:58 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.501s Queries: 15 (3.500s) Memory: 0.5948 MB (Peak: 0.6278 MB) Data Comp: Off Server Time: 2026-06-23 22:31:50 UTC
Valid HTML 5 and Valid CSS