cant set idle low enough

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: cant set idle low enough [Re: willzrunna96] #696845 02/15/06 08:23 PM

Joined: Jan 2004

Posts: 299

Fairview, Oregon

indy

Mudrunner

Jumpering the connectors just tells the computer to go to default timing. Are you able to get the default timing set with the connector jumpered? If not, that's another clue pointing to the TPS. Follow Roger's write up very carefully and don't skip any of his steps.

Good Luck,
Indy

Entire Thread
Subject	Posted By	Posted
cant set idle low enough	willzrunna96	02/15/06 05:59 AM
Re: cant set idle low enough	4Crawler	02/15/06 06:15 AM
Re: cant set idle low enough	willzrunna96	02/15/06 06:21 AM
Re: cant set idle low enough	indy	02/15/06 08:23 PM
Re: cant set idle low enough	willzrunna96	02/16/06 12:21 AM
Re: cant set idle low enough	Anonymous	02/16/06 12:49 AM
Re: cant set idle low enough	52degrees	02/16/06 04:09 PM
Re: cant set idle low enough	scogind	02/16/06 06:54 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.469s Queries: 16 (3.440s) Memory: 0.6085 MB (Peak: 0.6415 MB) Data Comp: Off Server Time: 2026-06-07 01:05:24 UTC
Valid HTML 5 and Valid CSS