A few weeks ago I stopped my ragged '82 CJ7 at the gas station, filled up, then went to start, and it cranked maybe one rotation and stopped.

It hasn't cranked since. I can crank manually with a socket wrench, but all I get when I turn the key is the starter solenoid making a noise. I like to throw replacement parts at my Jeep because most parts there are either really old, rusted, or both. So after taking apart the starter and seeing that much of the inner contacts were almost gone, I replaced that, then I replaced the solenoid and the 2 gauge wire from the solenoid to the starter, and it's still not cranking.

I'm pretty sure it's electrical, because a measure of what voltage is hitting the starter is basically nil. My major question, before I go undoing all the wiring wraps and such, is could the ignition module be a cause?

Also, from what I've been reading, the ignition module is under the radiator reservoir for a lot of jeeps, but (if I'm looking at the right thing) mine is near the starter solenoid.

Any info yall could provide would be great.

-Ron <img src="/forums/images/graemlins/scared.gif" alt="" />


'82 CJ7, Original 258
Unknown and undoubtedly ungodly amount of miles.