Some of you are aware of my conversion, where I replaced the 4d56 (2.5TD) engine with a 3.2 Di-D diesel engine.

The conversion is a great success, except for the final drive gearing.

Currently I have 1:4.875 diff ratio, which is way to low for my application (90% on-road).

The Gen3 Di-D comes with 1:3.9 diffs, so I thought that would be about what I needed.



According to the Aussie site, the current diffs I have are as follows:

http://www.outerlimits4x4.com/PHP_M...amp;sid=5452dcf54a5c0d6ac448b1764b11cef5

Front: 7.25" dia (low pinion), 25 spline, 29mm diameter

Rear: 8" dia, 28 spline, 30.5mm diameter



I found this site, where they advertise 3.9 diffs for Monteros:

http://www.trademotion.com/partloca...ro&year=1989&catalogid=1


The problem is that the supplier cannot verify whether in fact it will fit my Pajero.

Does anybody have any info on the availability/suitabiliy of these 3.9 R&Ps?


1989 Exceed LWB
4m41 (3.2DiD TurboDiesel
5-spd Manual Tranny
2" lift
31" BFG A/T