Oil filter assembly, what goes where?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Oil filter assembly, what goes where? #698183 02/19/06 02:19 AM

Joined: Dec 2005

Posts: 27

Nevada City CA

AndyR

Getting the Wheeling Fever

I am rebuilding my 88 trooper II 2.4L (4ZE1), and I have run into a bit of a problem. I have gotten to the point where the front is all done to the point of having the cover on and harmonic balancer and I am now trying to put on the oil filter assembly. My question is, where does the spring and plunger go? I am hoping it doesn't go in with the oild pump, but if anyone knows, I need help. Thanks
Andy.

1988 Trooper II in the works.

Entire Thread
Subject	Posted By	Posted
Oil filter assembly, what goes where?	AndyR	02/19/06 02:19 AM
Re: Oil filter assembly, what goes where?	RubyTrooper	02/20/06 01:47 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.473s Queries: 15 (3.471s) Memory: 0.5929 MB (Peak: 0.6259 MB) Data Comp: Off Server Time: 2026-06-20 04:20:35 UTC
Valid HTML 5 and Valid CSS