Oil filter assembly, what goes where?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Oil filter assembly, what goes where? [Re: AndyR] #698184 02/20/06 01:47 AM

Joined: Feb 2004

Posts: 278

Portland, OR

RubyTrooper Offline

Mudrunner

Hello Andy,

I don't have the 4cyl so can't help you on the question. However, you may want to read over bob large's excellent thread on his rebuild -> 2.6 rebuild Q's

He follows everything up with great photo documentation! <img src="/forums/images/graemlins/kewl.gif" alt="" /> Much to glean.

Jim

Isuzu Trooper, '91, 2.8L, 3" PA BL, coil sprung SAS, OX locker front, Detroit back, 5.38 gears...

Ruby's got a theme song!!! Sing-a-long

Entire Thread
Subject	Posted By	Posted
Oil filter assembly, what goes where?	AndyR	02/19/06 02:19 AM
Re: Oil filter assembly, what goes where?	RubyTrooper	02/20/06 01:47 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.520s Queries: 16 (3.518s) Memory: 0.5948 MB (Peak: 0.6278 MB) Data Comp: Off Server Time: 2026-06-21 02:25:51 UTC
Valid HTML 5 and Valid CSS