4.3 Vortec swap for Amigo

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 4.3 Vortec swap for Amigo #698395 02/20/06 01:12 AM

Anonymous

Unregistered

http://www.off-road.com/isuzu/v6trooper.html
I'm unsure if it would clear the stock diff... there is quite a bit of clearence with the 2.6, and I don't think it would be a problem. A body lift and a higher mounted engine would solve that problem. But would also raise the center of gravity.

Entire Thread
Subject	Posted By	Posted
4.3 Vortec swap for Amigo	Anonymous	02/19/06 09:22 PM
Re: 4.3 Vortec swap for Amigo	Anonymous	02/20/06 01:12 AM
Re: 4.3 Vortec swap for Amigo	strawmyers	02/20/06 01:17 AM
Re: 4.3 Vortec swap for Amigo	StinkBug	02/20/06 09:54 AM
Re: 4.3 Vortec swap for Amigo	Rodeo Guy	02/20/06 11:13 AM
Re: 4.3 Vortec swap for Amigo	ybnormal70	02/20/06 12:52 PM
Re: 4.3 Vortec swap for Amigo	Rodeo Guy	02/20/06 02:07 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.422s Queries: 15 (3.420s) Memory: 0.6014 MB (Peak: 0.6344 MB) Data Comp: Off Server Time: 2026-06-01 07:42:01 UTC
Valid HTML 5 and Valid CSS