Got a little bit accomplished today.The sway bar is now gone , the ball joints are off( a little grinding <img src="/forums/images/graemlins/smile.gif" alt="" /> ) , the axle is out , and the carrier is unbolted , but still have to get it apart.I also did a little more coating the frame , am about 3/4 of the way done with the rust stopper.After that I flip it over and do the bottom , then start painting it.I also bought that wax coating for the inside of the frame so it will never rust inside again.I think I will power spray the inside first , get whatever crap is still in there out before I coat it.

Other than that , nothing too much exciting , other than my angle grinder cathing on fire <img src="/forums/images/graemlins/scared.gif" alt="" /> No idea why , I was on number 3 of 4 little bolts , all the sudden it stopped and a flame shot about about a foot , I almost had to change my pants <img src="/forums/images/graemlins/nana.gif" alt="" /> This was a new grinder too , just got it a few months ago as my other one siezed up on me for some reason.No more new pics yet , but will get some when I have a chance.