Gee , its fun talking to myself , no one makes comments anymore <img src="/forums/images/graemlins/nana.gif" alt="" />

Anyway , I got the top half of the frame all spreayed today , have to flip it over and get the bottom yet before I start putting it back together.I also managed to get my lock right installed , just have to torque the ring gear bolts when I get the torque specs , and install it back in the carrier and onto the pumpkin again.

I took all the measurements for making my fuel cell holder , gonna have to go with a little different plan than using the stock tank holders , they are just a little too far out , so they are coming off , now that I got my angle grinmder replaced , just need another disc.The cell will be hanging off some brackets on the frame itself , and drop 12" , so it will be sitting at the height the stock one was , and I can still use the stock skid plate.Its just a matter of making the brackets and the cage to support the cell.Hopefully this weekend can get that done.

I do have a couple of pics , but my camera died and is recharging , so they will come a little later.Slowly but surely its coming together. <img src="/forums/images/graemlins/kewl.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" />