I have the small bracket with 2 bolts removed on both trucks , so no problem there.And I know how tight those nuts were , I broke a 29" cheater bar trying to loosen one <img src="/forums/images/graemlins/scared.gif" alt="" /> But I have both nuts off on both sides of the frame I am working on.I did use PB blaster and a hammer , so I guess I'll try some heat now.On the other truck I think I will have to remove the axle to get some room in there.It seems pretty tight to get the arms off with the axle.Although , I only need the bigger bolt with the splined end on it off each side and I'm golden.Thanks for the info , guess I just need to keep working on it till I get them off. <img src="/forums/images/graemlins/cheers.gif" alt="" />

1996 Jeep Grand Cherokee 5.2 with mods.Hughes Air gap intake , 52MM TB , ford injectors, 2 3/4" lift, Doug Thorley headers , HID headlights with LED , HID fog lights , glow gauges , a few others