Here ya go , hope these help.I have a question for Jerry regarding one of these diagrams anyway <img src="/forums/images/graemlins/smile.gif" alt="" />





My question for you Jerry , is on the back mounts , they have the measure ments from center to center going cross ways , and center to center from the front of the frame , but I don't see anything listing how far from the frame rails center is for the holes.These are the ones on the gussets on the inside of the frame rail , that I had replaced , I need to drill the holes to put the mounts in there , but I want to get it exact so there are no probs with not being aligned when I get to the point of putting the body back on.

Speaking of the body , I couldn't get the ones out that go up into the frame , all the parts that were tacked came undone , so I will have to cut the inside of the body up a little , get those bolts out , tack in the new ones , and then put the new bolts in.Then hide the cuts in the body <img src="/forums/images/graemlins/smile.gif" alt="" />