I'll be taking more pics soon once I get the a-arms on , then as I put more of the suspension stuff on.It should go pretty quick , I pre wrote all the torque specs on a piece of paper so I don't have to take the shop manual out there with me and get it all dirty.

As for the ECU , the stock 2.8 is supposed to work fine with the 3.4.It takes a little bit of driving for it to 'learn' the new stuff.It is mentioned in the write up stuff that Ed was giving out.Also , I did read somewhere that someone had put an ECU from a diferent engine in there , a 3.1 I think , which is pretty close to the same anyway , but supposedly it had more chance for a small gain in performance.I would have to find that article again to see exactly what it said.As long as you have an ECU from a 2.8 or 3.1 you should be fine.

1996 Jeep Grand Cherokee 5.2 with mods.Hughes Air gap intake , 52MM TB , ford injectors, 2 3/4" lift, Doug Thorley headers , HID headlights with LED , HID fog lights , glow gauges , a few others