Ok , I know I promised pics , but the battery is charging again , and don't have time to wait today.So far I have the a-arms on both sides , the axle is in with the diff drop brackets on , lockright in the axle , torsion bars on , both balljoints on the passenger side , and the upper control arm on the passenger side.I have to fix the one big bolt on the diff drop bracket on the drivers side , the part that screws into the frame came apart , so I will give it a quick tack weld to hold it so I can get the bolt all the way in.One more day and the front should be mostly done with brakes and hubs put on.I'll get pics tomorow , I promise <img src="/forums/images/graemlins/nana.gif" alt="" />
Anyway , with those lower control arms on , so far its been a breeze.The hardest part I did today was putting the front axle on.That can be a pain by yourself , but I managed <img src="/forums/images/graemlins/notooth.gif" alt="" /> Just not enough time in the day after work , and before dinner , I make the most progress on the weekends usualy.