Not a lot done today , but its something anyway <img src="/forums/images/graemlins/smile.gif" alt="" /> I took the axle into the the shop , got all of the bushings out of the springs and shackles , cleaned up the axle a little and resprayed some spots ,and all of the carrier.I also painted the shackles as they were getting discolored.I was then going to put my indy4x brake line on the back axle , but I noticed a major problem with it <img src="/forums/images/graemlins/scared.gif" alt="" />This is the hose that splits the one line to go to both rear lines , but there are no holes in the side for the 2 lines to split off.I think this one was missed when they were finishing them up <img src="/forums/images/graemlins/lol.gif" alt="" /> It does have the hole to bolt it to the axle , but thats it.

Anyway , all thats left to do is wait for the paint to dry , put all the bushings in , which I went with the poly instead of rubber for the back , put the shackles on , the shocks , that one brake line , and then change the tires from the 31 to the new 33" and the back is all done.That will leave me sitting on a fully finished suspension on the frame , with tires on.I can then run the brake lines on the frame , and thats done.I can't really do the fuel lines untill I get the fuel cell mounted in there so I know where to put everything, but that will be coming soon enough.Then I get to start putting the engine in and go from there.