Ok , spent a couple hours out there today (just under 3) , and actualy made some more progress.I got the axle all in , the driver side shock is on , and the passenger side shock is half on.Ran into a little snag with that too.I opened up the box , took everything out , and lo and behold , there was no hardware for the top of the shock <img src="/forums/images/graemlins/scared.gif" alt="" /> <img src="/forums/images/graemlins/confused.gif" alt="" /> Everything else was in there , the shock , bellows , sticker and zap strap , but no collrs , bushings and nut for the top.so , needless to say , the passenger side is not done yet with the brake line thing and the shock missing the hardware.The tires are now on , and its looking better.I also mocked into place my steering stabilizer in the front end , I didn't tighten anything down yet.

Yes , I do have some pics today <img src="/forums/images/graemlins/nana.gif" alt="" /> There are pics of the axle in , the shocks , close up of tire tread , one shot of the new rims , and a couple shots of the fuel cell I am putting in.Oh , a couple shots of the steering stabilizer , and also the diff drop bracket all in place , can't remember if I had one of that allready.






LINK

LINK












LINK

Heres a pic of the brake line , it has the hole where it bolts to the axle , but as you will see in the next pic , there are no more holes on the side , where it is supposed to split the brake line to the 2 rear brakes <img src="/forums/images/graemlins/scared.gif" alt="" />

LINK

Thats it for today , will have more pics as I make more progress <img src="/forums/images/graemlins/kewl.gif" alt="" />