Not as much done today as I would have liked.I had to take the diff drop bracket off a couple times and grind it down.The oil pan would rub on it when the motor was flexing , good thing I tested it right away by pushing it around a little.I put my oil filter relocation kit on today , but will have to get the low profile one where the hoses go out the side , as with the hoses on , it won't quite clear the header.I ran all the wires for the engine and plugged them in , so thats good to go.I then played around with the main exhaust pipes and headers , and I will have to get the main pipes all custom as they are just different enough to not want to work.I also took the transfer case off the truck in front , I think I will have to redo the teras in that case , as no one wants to attempt to fix the one hole that is dented in , that bolts to the tranny.And , to change the cover on to it , I pretty much have to take the whole case apart anyway.Its good practice <img src="/forums/images/graemlins/nana.gif" alt="" />