Well , got the oil filter adapter mounted today , I had to move the oil sensor to the other side , which I think shouldn't be a problem as it was threaded there , I just swapped the plug into that hole.I then put my other header on , so both are now on , and the hoses are on the oil relocator , just a matter of putting the filters on , and mounting it somewhere , just not sure exactly where yet.

I have the fuel cell ready to mount , but I needed some measurements to be sure of room with the hoses and adapters taking up 4.5" on top , so iif anyone can answer those questions in my other post <img src="/forums/images/graemlins/smile.gif" alt="" /> I also fixed up the bumper and hitch mounts , still have to fab something for the middle mount points , but that can be done later.

Pretty much next step after the cell is mounted , the front clip and rad go on , then the body <img src="/forums/images/graemlins/kewl.gif" alt="" />Now all I can hope is it fires up the first try so I can take it to get the Y pipe on , and an alignment.Hopefully this weekend or by mid week , the body should be on if everything goes well. <img src="/forums/images/graemlins/baby.gif" alt="" />