Well , today I put the front clip on , not fully tightened down yet , but it has the 3" lift in it.I then put the rad , tranny cooler and A/C rad in there.Hooked up all the rad hoses and tightened the rad down.I took a few pics of everything of course <img src="/forums/images/graemlins/smile.gif" alt="" />I do have 2 things I can't remember exactly where they go.One is a ground wire off the battery terminal wire , with an eyelet on it.I believe it came off the engine , just not sure where it goes back on.I have a pic of it in here , and the second one come soff the harness where the distributor is , its a long wire , yellow with a black stripe , with a single pin connection on it , I can't remember if it goes to the winter/power switch control when the body is on , or if it goes to the engine somewhere <img src="/forums/images/graemlins/scared.gif" alt="" /> All the other wires and cables I marked , so easy to fix , I just forgot a couple <img src="/forums/images/graemlins/lol.gif" alt="" /> I have a pic of me holding that wire also.



the tranny with the modified transfer case shifter



The modified shift linkage.I just had some rod added to it.



From the back , the engine and clip and stuff.



The view from the front.



View from the top.



The wire with the eyelet in the middle of the pic is the one I believe goes on the engine somewhere , just not sure where.If not on the engine , maybe where the hole in the wheel well is with a bolt?But I can't see a ground going there , the other one goes to the frame , so it has to go to the engine <img src="/forums/images/graemlins/smile.gif" alt="" />



And this is the yellow wire with black stripe that is by the distributor.Its fairly long , and looks like it could go to the tranny , or to the engine.I'm guessing to the tranny once the body is on and thats why I can't find where it plugs in yet <img src="/forums/images/graemlins/notooth.gif" alt="" />