Quote

The wire with the eyelet in the middle of the pic is the one I believe goes on the engine somewhere , just not sure where.If not on the engine , maybe where the hole in the wheel well is with a bolt?But I can't see a ground going there , the other one goes to the frame , so it has to go to the engine <img src="/forums/images/graemlins/smile.gif" alt="" />


theres a hole for that on the side of the block near the bottom, im guessing its the same on the 3.4 so stick your head in the wheel well and look around for it.

by the way I dont post much but ive been watching your threads this whole time, knowing the kind of things you are going through.. I joined this board around the time you started, and finished my body swap project about a year ago. that was enough to get it on the road and get me obsessed with troopers, now I have the good frame from the donor body waiting to be painted and built up in a similar fashion. Its alot of work but in the end it feels good knowing there is nothing that cant be taken apart and put back together again <img src="/forums/images/graemlins/cheers.gif" alt="" />

1991 Trooper 2.8, 5spd - waiting for a different frame and tranny
1992 Rodeo 3.1, 5 spd - 1 inch between me and the headliner