When the frame is bare is the best time to do any mods you want to do <img src="/forums/images/graemlins/smile.gif" alt="" /> I decided to do everything while I am swapping the frame.It is so much easier to work on things with no engine or body in your way.Everything was replaced , swapped , or is brand new on this puppy , so should be good for a long time now <img src="/forums/images/graemlins/kewl.gif" alt="" />

Not a lot to do today as I need the metal to finish my fuel cell brackets , so I got rid of the old frame and engine from out front.I now have room out there to put the new frame , so I can put the body back on.It only took me 2 hours to cut up the frame , and move the engine to my other shop where I built up the 3.4.Tomorow I go dump off the scrap metal , and pick up the metal I need to get the cell in there.After that is the body.

1996 Jeep Grand Cherokee 5.2 with mods.Hughes Air gap intake , 52MM TB , ford injectors, 2 3/4" lift, Doug Thorley headers , HID headlights with LED , HID fog lights , glow gauges , a few others