Well , today I kind of got the body on.For now its on the frame with some blocks under it untill I get the body lift installed.The back end is a little over an inch higher than with the lift , and the front end is just a little too low to fit the lift blocks in right now.I first have to fix my little boo boo <img src="/forums/images/graemlins/scared.gif" alt="" /> I miscalculated a little where the cell sits , and how high , one of the fuel lines ended up sitting almost right under the cross member on the bottom of the body.I think I can possibly make it work so it sits between the 2 lines , or just take a little notch out of it as its just a hair short of being the right fit.Also , I went to put the angled fuel filler on , and found out they are welded into the tank , something the salesman neglected to tell me when I told him what I wanted it for <img src="/forums/images/graemlins/angry.gif" alt="" /> So , now I have to get more fuel hose and make it work with the straight nozzle on the cell.Other than that , its sitting almost perfect for putting the lift in , just have to slide the back over a hair to get the bolt holes perfectly lined up.

Anyway , heres todays pics.







The first 3 are before the body went on.The next 3 are with the body on , and the last one shows the cell , and you can kind of see the mistake.