Well , I modified the stock body mount pads , and put all the lift pucks in.I haven't torqued them down yet , thats tomorow project.I also wired inmost of the engine , except for a few wires I have no idea on.I went and lost my before pics of the wiring , so theres 4 wires I am at a loss for right now.I do have a post of them with pics in the tech section for anyone that knows the wiring <img src="/forums/images/graemlins/smile.gif" alt="" />The lift is pretty much done other than tightening the bolts , and I have to adjust the steering extension yet.

A couple more things under the hood yet , and then shes ready to fire up.I'm not going to put the fenders and stuff on just yet , will wait to see if it beathes or not.Once I know its running , then I'll finish that off and take it for the alignment and have the Y pipe put on.

I might start the power windows and locks tomorow after I get the lift all done.Untill I figure out those last wires , can't really start it up.The power windows looks like maybe a 3 hour job or so , maybe less seeing I have half the stuff apart <img src="/forums/images/graemlins/smile.gif" alt="" />

Anyway , its getting there , and thats the main thing.