Well , did a few things today.I got the last 2 bolts in for the body lift , thats all done , got my front brake line on and started filling the fluid , then found I have a little problem.Near the back of my brake line that I ran , theres a small hairline crack in it <img src="/forums/images/graemlins/scared.gif" alt="" />That means I have to either replace the whole line again , or get one of those splice peices and just put a splice in there.I played around with my Jacobs , and had no luck with it.

I filled up the rad with fluid , so thats ready to go , my oil filters are on and ready to go.I hooked up the battery to fire it up , it turns over fine , but no spark <img src="/forums/images/graemlins/confused.gif" alt="" />I put the stock coil plugs back on , and same thing , not getting any spark at all.The fuel is coming in fine , so the pump works.Not sure what I did wrong to get no spark at all <img src="/forums/images/graemlins/baby.gif" alt="" />

Also , I noticed that little pan on the transmission leaks once the pump isnide starts going when the key is in the 'ON' position.So , I'll have to take the small pan off and use some RTV.The bigger pan is fine as I got a new gasket on there when I did the filter.Thats an easy fix , so is the brake line , depends what I decide to do there.

Also , I'm still trying to figure out the gugae problem with that stupid circuit board style they have.Seems you can get all kinds of kits out there , but they are all mechanical , so you have to add more lines to your engine , something I don't want to do.

So , for right now , I'm racking my brain trying to figure out the no spark problem I have.I think once I get spark , it should fire up <img src="/forums/images/graemlins/smile.gif" alt="" />