Ok , todays update is I picked up a 4.3 TBI and installed it.Justhave the cable bracket and cable to hook back up , but I tested it and it works fine with no leaks at all.Truck fires up right away.

On the bad side for today , I noticed something I didn't like.It looks like its leaking a little oil by the bottom of the tranny bellhousing.Now , I see 2 possibilities , either the seal went out , which I had just replaced when I did the engine <img src="/forums/images/graemlins/scared.gif" alt="" /> . I hope its not that , or it means I have to take it all apart again , something I don't really want to do , but if its puking out oil , it has to be fixed.The second option , and I hope its what it is , is the oil pan gasket where that U shape is is leaking.If so , thats a little easier to fix without dropping the tranny.Not an easy job , but still less work than taking the tranny off and putting in a new rear seal.It always seems to be something , you start to make progress , then take 4 steps backwards <img src="/forums/images/graemlins/angry.gif" alt="" />

Anyway , the truck runs , no tranny fluid leak , no gas leak anymore.So , now its fix the oil leak. <img src="/forums/images/graemlins/evil.gif" alt="" /> <img src="/forums/images/graemlins/evil.gif" alt="" /> <img src="/forums/images/graemlins/evil.gif" alt="" /> <img src="/forums/images/graemlins/evil.gif" alt="" />