Ok , tank is done , moved it back about 2" and raised it 2" so its higher now than it was before.Still no pics of the new work yet , but will soon.I have to redo part of my fuel fill hose , I tried to skimp on part and it leaked.Easy fix though , just need another hose clamp <img src="/forums/images/graemlins/notooth.gif" alt="" />

I put the traction bars on and they do ake a difference.I still have a bit of a shimmy , but not near as bad as it was.I might just have to tighten up the bolts a little , so I will start there for the easy fix.I will also do a double check of the driveshaft angle and carrier bearing.

I also put my 14" K&N filter on , only took me 2 tries to get the threaded rod to hold the lid on at the right angles.It looks pretty good , but does cover a lot more of the engine bay then the 10" did.I think the stock one was a 12" , but I'm not positive.

Still lots to do , mostly small things , and not really related to the drivability.I will have to put the skidplates on soon so I can at least go try out the tera lows and the lockright in the front <img src="/forums/images/graemlins/smile.gif" alt="" /> I might have to heli coil some of the holes for the skid plates as some bolts did break off in there.

If anyones up for any wrenching , they can always drop by , all the hard work is done now <img src="/forums/images/graemlins/cheers.gif" alt="" />