I looked through the FSM and didn't see it. I thought maybe I was getting my info mixed up. Something is still not quite right with the idle up though. After adjusting the screw I circled the idle up is much better but it doesn't kick up the idle all the time. Especially when it's cold. I have to give it some gas and then it kicks the idle up. But then sometimes when it's cold, it lets the idle go back down. Almost like the linkage is slipping off the cam. I'll take a look over at 4Crawler's website and see if I can find it. Thanks.

As far as the AC goes, I think I'm going to through some leak detector/sealer in and see if I have any major leaks before I go through the trouble of discharging, installing a new drier, and recharging.