|
|
 '86 22RE needs larger exhaust down pipe
#699291
02/21/06 11:26 PM
|
Joined: Feb 2006
Posts: 32
OP
Getting the Wheeling Fever
|
Some time ago I read a rather long posting detailing what you can do to get optimal performance out of a 22RE. It was quite informative. Unfortunately, I didn't bookmark it. It said that for optimal economy/power, put 2" pipe from the manifold (not headers) to the catalytic converter and 2 1/4+" pipe from there back.
My 22RE has 2 1/4" Jardine catback, but has stock down pipe. I'd like to take that to 2" but have only been able to find the Bosal downpipe (even local Toy dealer is selling the Bosal). Anyone know where to get a 2" downpipe from stock exhaust manifold to catalytic converter?
Also, anyone remember the above mentioned informative post? Was it here or in another forum? I thought it was here, but all of my searching has turned up nothing.
[color:"royalblue"]Original Owner: 86 4Runner, Marlin 4.7:1 t/c, Aussie f/r, BJ Spacers, 4Crawler Sliderz, BudBuilt skid-x-belly, Warn M8,TJM T17, Alcan leaves, OME N94 & N98, MC rear bumper[/color]
|
|
|
Re: '86 22RE needs larger exhaust down pipe
[Re: 86Original]
#699292
02/22/06 06:55 AM
|
Joined: Jun 2004
Posts: 435
Mudrunner
|
swap it out for a full length header? they can be found relatively cheap. a new downpipe cost me 90 bux so a little more for a used header would be my route.
87 4runner 33" bfg mt's no lift. dubbed the marine by my frinds. dead as of august 14 2005. 84 ex cab p/u 33"a/t, 3" suspension+3"bodylift, thorley header and 2.25xhaust, downey midrange cam+rocker set, very milled head! NO RUST!
|
|
|
Re: '86 22RE needs larger exhaust down pipe
[Re: lookmomnobrains]
#699293
02/24/06 02:31 AM
|
Joined: Feb 2006
Posts: 32
OP
Getting the Wheeling Fever
|
This is my DD and last week it was -16F at our house. From the Yota engine guru's I've heard that headers are a pain in cold weather. Prefer to keep my manifold.
[color:"royalblue"]Original Owner: 86 4Runner, Marlin 4.7:1 t/c, Aussie f/r, BJ Spacers, 4Crawler Sliderz, BudBuilt skid-x-belly, Warn M8,TJM T17, Alcan leaves, OME N94 & N98, MC rear bumper[/color]
|
|
|
Re: '86 22RE needs larger exhaust down pipe
[Re: 86Original]
#699294
02/24/06 07:28 PM
|
Joined: Jul 2004
Posts: 92
Getting the Wheeling Fever
|
i belive it was here, if this is what you were talking <a href="abouthttp://www.4x4wire.com/forums/showflat.php?Cat=&Number=820891&page=0&view=collapsed&sb=5&o=all&fpart=1" target="_blank">abouthttp://www.4x4wire.com/forums/showflat.php?Cat=&Number=820891&page=0&view=collapsed&sb=5&o=all&fpart=1</a>
87 ex-cab 4x4 D D
89 4runner Work in progress!
|
|
|
Re: '86 22RE needs larger exhaust down pipe
[Re: justinmnhall]
#699295
02/24/06 10:31 PM
|
Joined: Oct 2005
Posts: 1,287
Body Damage is Cool
|
i belive it was here, if this is what you were talking <a href="abouthttp://www.4x4wire.com/forums/showflat.php?Cat=&Number=820891&page=0&view=collapsed&sb=5&o=all&fpart=1" target="_blank">abouthttp://www.4x4wire.com/forums/showflat.php?Cat=&Number=820891&page=0&view=collapsed&sb=5&o=all&fpart=1</a> <img src="/forums/images/graemlins/kewl.gif" alt="" />
-1986 TOYOTA
22R
ZUK coil rear
Torqued T-Bars
Marlin HD clutch
Newly rebuilt!! Runnin' like a champ!
AZTTORA #492
TLCA member
"I hear there's rumors on the Internets that we're going to have a draft."
--George W. Bush
|
|
|
Re: '86 22RE needs larger exhaust down pipe
[Re: 4WD22R]
#699296
03/27/06 05:01 PM
|
Joined: Feb 2006
Posts: 32
OP
Getting the Wheeling Fever
|
That was exactly it! Thanks!
Now EB, Where do I get 2" down pipes to use with the "excellent stock manifold"?
[color:"royalblue"]Original Owner: 86 4Runner, Marlin 4.7:1 t/c, Aussie f/r, BJ Spacers, 4Crawler Sliderz, BudBuilt skid-x-belly, Warn M8,TJM T17, Alcan leaves, OME N94 & N98, MC rear bumper[/color]
|
|
|
Re: '86 22RE needs larger exhaust down pipe
[Re: 86Original]
#699297
03/27/06 09:53 PM
|
Joined: Feb 2006
Posts: 32
OP
Getting the Wheeling Fever
|
Heard from EB via email that you just have to have one fabbed at a local muffler shop.
[color:"royalblue"]Original Owner: 86 4Runner, Marlin 4.7:1 t/c, Aussie f/r, BJ Spacers, 4Crawler Sliderz, BudBuilt skid-x-belly, Warn M8,TJM T17, Alcan leaves, OME N94 & N98, MC rear bumper[/color]
|
|
|
|
