Mig welder???

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Mig welder??? [Re: bigjeep1980] #699492 02/23/06 02:29 AM

Joined: Apr 2000

Posts: 947

California Central Coast

Berkeley

Jeep Moderator

Make sure the tip matches the wire. There's a little leeway, but obviously a fat wire won't feed through a small tip. Are you gas or flux core?

Entire Thread
Subject	Posted By	Posted
Mig welder???	bigjeep1980	02/22/06 02:38 PM
Re: Mig welder???	cuervo25	02/22/06 03:25 PM
Re: Mig welder???	bigjeep1980	02/22/06 03:36 PM
Re: Mig welder???	tomriddle	02/22/06 05:01 PM
Re: Mig welder???	BigJim	02/22/06 05:38 PM
Re: Mig welder???	jstritec	02/22/06 10:16 PM
Re: Mig welder???	Berkeley	02/23/06 02:29 AM
Re: Mig welder???	bigjeep1980	02/23/06 01:51 PM
Re: Mig welder???	bigjeep1980	03/06/06 07:07 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.521s Queries: 16 (3.519s) Memory: 0.6093 MB (Peak: 0.6423 MB) Data Comp: Off Server Time: 2026-06-05 06:53:21 UTC
Valid HTML 5 and Valid CSS