Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Any reason to not run w/o a sway bar? #700827 02/27/06 03:49 AM
Joined: Nov 1999
Posts: 278
BallaRat Offline OP
Mudrunner
4Crawler and I were talking about this. I'll certainly take his word highly rated, though wanted to see others' thoughts. My '94 w/IFS was making a noise on the underside since November. Finally got it figured out, thanks to REALLY looking under the rig (d'oh!) The sway bar was completely broken right near the passenger side bracket. I really haven't noticed a lot of difference in the ride since November; this weekend I tore out the broken bar and brackets. Figuring on just running the rig without a sway bar at all. Any thoughts as to why that wouldn't be OK...?

Re: Any reason to not run w/o a sway bar? [Re: BallaRat] #700828 02/27/06 03:55 AM
Joined: May 2002
Posts: 186
J
jmsdad Offline
Wheeler
I tossed both from my 2 trucks(previous and curent). Slight body lean on twisty roads. Other than that, couldn't tell the difference!

If you feel like keeping it, you should be able to get a replacement pretty cheap and get some new bushings.

Re: Any reason to not run w/o a sway bar? [Re: BallaRat] #700829 02/27/06 04:01 AM
Anonymous
Unregistered
I removed the front swaybar on my 95 IFS when I replaced a CV. I don't miss it a bit.....

Re: Any reason to not run w/o a sway bar? [Re: BallaRat] #700830 02/27/06 04:01 AM
Joined: Nov 2000
Posts: 1,011
Rusty Davis Offline
Body Damage is Cool
I've run my last 2 vehicles w/out front or rear sway bars and there's nothing wrong with it.

As long as you are comfortable with the fact the body roll will increase and adjust your driving accordingly there is no harm in it. Some vehicles have more body roll than others after removing them.

For instance, my 98 Amigo had a lot more body roll after taking the sway bars off than my 94 4Runner. Friends said that my Amigo looked like it was going to tip over around corners whereas I hardly noticed the lack of sway bars in my Runner. Of course YMMV

Just to be on the safe side, be sure to warn anyone that may drive your vehicle that it has no sway bar(s)!

HTH, <img src="/forums/images/graemlins/cheers.gif" alt="" />

~R


94 4Runner 3.slow-5spd, 4" coils, 1.5" BJ spacers, 2" BL, 35x12.50 Nitto's, 5.29's with a front Lockrite and a rear Detroit; 250k miles and lots of offroad time...and by offroad I mean on jackstands.
Re: Any reason to not run w/o a sway bar? [Re: Rusty Davis] #700831 02/27/06 04:21 AM
Joined: Nov 1999
Posts: 278
BallaRat Offline OP
Mudrunner
Quote


Just to be on the safe side, be sure to warn anyone that may drive your vehicle that it has no sway bar(s)!



What? I let others drive my rig??? Perish the thought <img src="/forums/images/graemlins/smile.gif" alt="" />

Thanks for the replies. Like I said, I'm sure it's been broke since November on a Death Valley trip. I haven't really noticed any difference since, so I'll keep it all off. Yep, if I did put a new one on, it'd be with new bushings (grab the jam, the old ones are toast) and quick disconnects. But this is just one small step closer to a SAS, removing the parts the "natural" way.

Meanwhile...tires soon....very soon.


Don West
Gettin'Off4x4 Member
'94 Reg Cab, 1" BL, 33 MTs, Detroit f/r, 4.88s, dual Marlins, blah blah woof woof
Re: Any reason to not run w/o a sway bar? [Re: BallaRat] #700832 02/27/06 05:09 AM
Joined: Nov 2000
Posts: 1,011
Rusty Davis Offline
Body Damage is Cool
Quote
Quote


Just to be on the safe side, be sure to warn anyone that may drive your vehicle that it has no sway bar(s)!



What? I let others drive my rig??? Perish the thought <img src="/forums/images/graemlins/smile.gif" alt="" />


<img src="/forums/images/graemlins/lol.gif" alt="" /> I wouldn't let anyone else drive mine either, but you know...some people do <img src="/forums/images/graemlins/rolleyes.gif" alt="" /> <img src="/forums/images/graemlins/pfft.gif" alt="" />


94 4Runner 3.slow-5spd, 4" coils, 1.5" BJ spacers, 2" BL, 35x12.50 Nitto's, 5.29's with a front Lockrite and a rear Detroit; 250k miles and lots of offroad time...and by offroad I mean on jackstands.
Re: Any reason to not run w/o a sway bar? [Re: Rusty Davis] #700833 02/27/06 05:15 AM
Joined: Oct 2004
Posts: 1,270
willzrunna96 Offline
Body Damage is Cool
im nervous enough to bring my truck to toyota for the recall


91 pickup 5.29's US GEAR.35x 12.50 trxus m/t.5 speed swap- SOLD!
96 4Runna limited-toytec/OME lift,diff drop Nitto 285/75/16 Elocked=butter
07 FJ cruiser 3" DR coilovers 285/75/16 nitto TG. allpro sliders
Re: Any reason to not run w/o a sway bar? [Re: BallaRat] #700834 02/27/06 06:41 AM
Anonymous
Unregistered
I took mine off have had no problems
My 1st lift I put the extensions on only to snap
the heads off so made my own with some tubing and
all thread only to bend them all the time and noticed
that without I had alot more articulation so my 2nd
lift I threw it into the junk pile along with the
torque arm and ground off all the mounts 0n my axle
and Im a happy camper <img src="/forums/images/graemlins/smile.gif" alt="" />

Re: Any reason to not run w/o a sway bar? #700835 02/27/06 08:09 AM
Anonymous
Unregistered
I took the sway bar off of my old 88 Comanche straight axle, and that was the best thing I could have done. Now, I have a 96 T-100 with a LT front end, and no sway bar. I noticed a little more body roll, but nothing major. Once I revalved the shocks, the body roll got less as well. Removing it lets the front end actually be independent, but you get body roll. Just adjust your driving accordingly, and remember, it is a matter of personal preference. If you really wanted to, you could get a quick diconnect sway bar for your truck. My .02


Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 9.852s Queries: 15 (0.007s) Memory: 0.6210 MB (Peak: 0.7252 MB) Data Comp: Off Server Time: 2026-11-17 11:31:27 UTC
Valid HTML 5 and Valid CSS