Bolts on the u-joint

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Bolts on the u-joint [Re: wax66] #700970 02/28/06 05:58 AM

Joined: Jun 2004

Posts: 1,904

wyleone

Body Damage is Cool

Try 1/4" 12pt. CJ's did not use metric sizes. 1/4" = 6.3mm explaining why the 7mm was close.

Entire Thread
Subject	Posted By	Posted
Bolts on the u-joint	wax66	02/27/06 02:52 PM
Re: Bolts on the u-joint	BigJim	02/27/06 03:36 PM
Re: Bolts on the u-joint	wax66	02/27/06 03:55 PM
Re: Bolts on the u-joint	JeePete	02/27/06 04:00 PM
Re: Bolts on the u-joint	wyleone	02/27/06 05:16 PM
Re: Bolts on the u-joint	BigJim	02/27/06 05:47 PM
Re: Bolts on the u-joint	wax66	02/28/06 12:07 AM
Re: Bolts on the u-joint	wyleone	02/28/06 05:58 AM
Re: Bolts on the u-joint	wax66	03/01/06 01:42 AM
Re: Bolts on the u-joint	JeePete	03/01/06 05:05 AM
Re: Bolts on the u-joint	jstritec	03/02/06 01:15 AM
Re: Bolts on the u-joint	wax66	03/03/06 02:45 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.474s Queries: 16 (3.472s) Memory: 0.6164 MB (Peak: 0.6494 MB) Data Comp: Off Server Time: 2026-06-24 08:59:45 UTC
Valid HTML 5 and Valid CSS