Finishing Up a 22RE

Print Thread

Rate Thread

Re: Finishing Up a 22RE "Rebuild" [Re: ToYPU] #701346 03/01/06 02:43 PM

Joined: Feb 2006

Posts: 24

bikedoctor Offline

Need a Spot

Ok, ok! I'll drop the pan. Thank you for the advice. Is there any trick to getting it off? Is it possible to sneak a wrench in and unbolt the pickup so I can slide the pan behind the front diff? I'm going to do my best to find a way not to drop the diff or jack the engine, but I have my doubts. BTW, I have the independant front suspension.

Entire Thread
Subject	Posted By	Posted
Finishing Up a 22RE "Rebuild"	bikedoctor	02/28/06 04:20 PM
Re: Finishing Up a 22RE "Rebuild"	engnbldr	02/28/06 05:17 PM
Re: Finishing Up a 22RE "Rebuild"	bikedoctor	02/28/06 07:01 PM
Re: Finishing Up a 22RE "Rebuild"	4WD22R	02/28/06 09:23 PM
Re: Finishing Up a 22RE "Rebuild"	Anonymous	02/28/06 09:37 PM
Re: Finishing Up a 22RE "Rebuild"	Buck	03/01/06 03:51 AM
Re: Finishing Up a 22RE "Rebuild"	ToYPU	03/01/06 05:16 AM
Re: Finishing Up a 22RE "Rebuild"	bikedoctor	03/01/06 02:43 PM
Re: Finishing Up a 22RE "Rebuild"	4WD22R	03/01/06 05:20 PM
Re: Finishing Up a 22RE "Rebuild"	bikedoctor	03/03/06 03:52 PM
Re: Finishing Up a 22RE "Rebuild"	grandeyota	03/03/06 04:36 PM
Re: Finishing Up a 22RE "Rebuild"	ToYPU	03/03/06 04:36 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: