I just finished the install of my Safari snorkel (Model number SS100HF) I bought mine from Matt at www.independent4x.com

Anyway it's not a direct fit and I had to do some modifications to get it to work. Like the template that was in the box didn't work so I had to eyeball the 89mm hole to cut in the fender.

The inner fender part of the snorkel was about 1-1/2" too long. I cut it and took 1-1/2" out of the length and fused it back together.

The bracket that holds the top of the snorkel to the roof doesn't follow the roofline. So I cut one of the bolt holes off so only two bolts instead of three are holding the top on. I may make a custom bracket and do it the way it was designed to be held on sometime later.

Here's the pics:

[Linked Image]


[Linked Image]

I think it turned out nice. <img src="/forums/images/graemlins/kewl.gif" alt="" />

Joe

A gun in the hand is better than a cop on the phone.

98 Passport 33's, Supercharged, Calmini Bumper, rockbars, diff drops, Teralows, 4.77's, Aussie and ARB lockers, Safari snorkel, Optima red top.