backspacing

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: backspacing [Re: Billdo] #702094 03/09/06 07:10 AM

Joined: Apr 2000

Posts: 7,268

Ventura County

mlclark

Isuzu Moderator

Then, the center of the wheel will be almost centered in the rim. The shell will be pushed out 11/16 of an inch.

They should be close to stock and they should work for you. But, I would measure one of your current wheels for BS and rim width and see how they compare. I don't want to tell they will be OK without you checking to make sure. <img src="/forums/images/graemlins/smile.gif" alt="" />

Michael

Entire Thread
Subject	Posted By	Posted
backspacing	Billdo	03/02/06 07:39 PM
Re: backspacing	bob large	03/02/06 08:02 PM
Re: backspacing	barak	03/02/06 09:13 PM
Re: backspacing	mlclark	03/02/06 11:51 PM
Re: backspacing	Billdo	03/09/06 07:04 AM
Re: backspacing	mlclark	03/09/06 07:10 AM
Re: backspacing	Billdo	03/09/06 08:26 AM
Re: backspacing	rheteric	03/14/06 09:52 PM
Re: backspacing	CPOM	03/14/06 10:47 PM
Re: backspacing	strawmyers	03/14/06 10:12 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.793s Queries: 16 (3.791s) Memory: 0.6130 MB (Peak: 0.6460 MB) Data Comp: Off Server Time: 2026-06-10 17:39:58 UTC
Valid HTML 5 and Valid CSS