Oil pressure gauge - dead - 4x4Wire TrailTalk

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Oil pressure gauge - dead #702248 03/03/06 03:04 AM

Joined: Mar 2006

Posts: 3

88Suzy

Need a Spot

I have an '88 trooper with 2.6L. When I bought the truck, the oil pressure gauge worked fine. After removing the cylinder head for replacement, the oil pressure gauge is now dead -- 0. I know I have oil pressure. Also the dummy light goes off when the engine starts. Anybody know what I might have affected by only removing the engine top end?

Entire Thread
Subject	Posted By	Posted
Oil pressure gauge - dead	88Suzy	03/03/06 03:04 AM
Re: Oil pressure gauge - dead	Anonymous	03/03/06 03:36 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.769s Queries: 16 (3.767s) Memory: 0.5922 MB (Peak: 0.6252 MB) Data Comp: Off Server Time: 2026-06-25 18:13:01 UTC
Valid HTML 5 and Valid CSS