|
|
|
|
 Will all 8" 3rd members work in an 1984 rearend?
#702938
03/05/06 06:01 PM
|
Joined: Oct 2005
Posts: 73
OP
Getting the Wheeling Fever
|
Changed out the shot and very noisy tranny in my wifes 84 4x4 with a rebuilt Marlin unit and found that the ring and pinion in back is shot too.
It looks like the 79-85 55"wide rearend will fit in the 1984 but I noticed that all of the 3rd members from 79-94 use an 8" R&P with 30 spline axles.
Will all Toyota 8" 3rd members fit in an 1984 rearend?
Am I correct in thinking that the 79-85 rearend will bolt into the 1984?
Thanks for your help.
89 Ext cab 22RE 5 speed
84 Ext cab 22R 5 speed
88 Mitsubishi Macro Cab 2.6 5 speed
|
|
|
Re: Will all 8" 3rd members work in an 1984 rearend?
[Re: zoomschwortz]
#702939
03/05/06 06:18 PM
|
Joined: Sep 2003
Posts: 1,686
Body Damage is Cool
|
3rd members yes. I have a 1994 pickup and a 1995 4Runner rear thirds in eash axle of my 85. Entire rear axle assembly's however is different. Some mods will need to be done depending on the years. But, just 3rds, your OK. PS you can swap 4cyl for 6cyl too! <img src="/forums/images/graemlins/kewl.gif" alt="" />
85 4Runner - With NEW Marlin 4.7 Gears!! It's a whole new beast!
|
|
|
Re: Will all 8" 3rd members work in an 1984 rearend?
[Re: Staceman]
#702940
03/05/06 11:22 PM
|
Joined: Oct 2005
Posts: 73
OP
Getting the Wheeling Fever
|
Thank you for the info.
Is there any difference between the 8" rear 3rd member and the 8" front 3rd member or can they be interchanged?
89 Ext cab 22RE 5 speed
84 Ext cab 22R 5 speed
88 Mitsubishi Macro Cab 2.6 5 speed
|
|
|
Re: Will all 8" 3rd members work in an 1984 rearend?
[Re: 4Crawler]
#702942
03/06/06 04:31 PM
|
Joined: Oct 2005
Posts: 73
OP
Getting the Wheeling Fever
|
Thanks again for the help.
I found a complete (w/locking hubs) front and rear with aftermarket springs from an 85 for $350.
Sounds like it will work.
89 Ext cab 22RE 5 speed
84 Ext cab 22R 5 speed
88 Mitsubishi Macro Cab 2.6 5 speed
|
|
|
Re: Will all 8" 3rd members work in an 1984 rearend?
[Re: zoomschwortz]
#702943
03/07/06 04:00 AM
|
Joined: Sep 2003
Posts: 1,686
Body Damage is Cool
|
I found a complete (w/locking hubs) front and rear with aftermarket springs from an 85 for $350.
Sounds like it will work. Heck yes. It'll all bolt up. good score <img src="/forums/images/graemlins/kewl.gif" alt="" />
85 4Runner - With NEW Marlin 4.7 Gears!! It's a whole new beast!
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.012s Queries: 15 (0.009s) Memory: 0.6094 MB (Peak: 0.6790 MB) Data Comp: Off Server Time: 2026-07-17 02:42:08 UTCValid HTML 5 and Valid CSS 
