engine stand bolts for v6

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

engine stand bolts for v6 #703984 03/08/06 01:49 AM

Joined: Jul 2002

Posts: 79

Dallas, TX

vrooooom

Getting the Wheeling Fever

This is not a question but information. I searched this forum but could only find the size for the 22re engine. Well, I took a chance and bought the same size and it works.

The bolts you need to put a 5vze (probably same as a 3vze) on an engine stand are M12x1.25x80mm.

I got them at http://www.mcmaster.com. (click on "Bolts" under "Fastening and Sealing") $8.24 for a box of 10. Add shipping, and it comes out to $1.30 each.

stock 1994 Toyota 4x4 XtraCab v6 SR5 pickup

Entire Thread
Subject	Posted By	Posted
engine stand bolts for v6	vrooooom	03/08/06 01:49 AM
Re: engine stand bolts for v6	TRDSR5	03/08/06 03:38 AM
Re: engine stand bolts for v6	mt_goat	03/08/06 03:49 AM
Re: engine stand bolts for v6	Nix_Toy	03/08/06 02:05 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.523s Queries: 15 (3.520s) Memory: 0.5968 MB (Peak: 0.6298 MB) Data Comp: Off Server Time: 2026-06-25 01:02:13 UTC
Valid HTML 5 and Valid CSS