|
|
 What I fopund when I took my front apart.
#704700
03/09/06 07:50 PM
|
Joined: Jan 2001
Posts: 3,876
OP
Roll Me Over
|
When I was taking my knuckle off I knew the bearing was not going to look good when I found this. ![[Linked Image]](http://pics.montypics.com/tag/2006-03-09/1141930070_dscf0066.jpg) I was correct because later I found this. ![[Linked Image]](http://pics.montypics.com/tag/2006-03-09/1141930089_dscf0070.jpg) Then when I was done beating the <img src="/forums/images/graemlins/evil.gif" alt="" /> out of the bearing trace this is what I ended up with. ![[Linked Image]](http://pics.montypics.com/tag/2006-03-09/1141930164_dscf0082.jpg) When I finally get to the other side I will just have a machine shop take them out before pressing in my new bearing. Also notice in the last pic I found a new tanning method. <img src="/forums/images/graemlins/barf.gif" alt="" />
89 2dr 3.0 AT, manual hubs. 33x12.5 MT gen 2 coils,Cranked front tbars Dons rocker protection, Front/Rear Bumpers. ARB rear locker, 2" BL, Beefed up skid plates/trailing arms. Gen II uca, 2 Bouncy seats www.youtube.com/TagGeorge
|
|
|
Re: What I fopund when I took my front apart.
[Re: Tag]
#704701
03/09/06 07:56 PM
|
Joined: Feb 2004
Posts: 10,238
Web Wheeler
|
What's the crack above the needle bearing? Is it just the oil seal flange or is the knuckle cracked? I can't remember exactly what's what in the assembly.
Frank
'89 [color:"white"]G-Raider[color:"white"] [color:"black"]Supercharged 3.0L, MegaSquirt 2, lockup A/T, 2.5" exhaust, 172k, Cibie H4s/Oscar SCs, Hella Micro DE fogs, Cobra CB, Superwinch hubs, LSD rear/Aussie Locker front, Bilsteins, Lifeline AGM, Rust-Oleum
|
|
|
Re: What I fopund when I took my front apart.
[Re: FrankR]
#704702
03/09/06 08:10 PM
|
Joined: Jan 2001
Posts: 3,876
OP
Roll Me Over
|
It just looks like a crack it is just dirt on the seal.
89 2dr 3.0 AT, manual hubs. 33x12.5 MT gen 2 coils,Cranked front tbars Dons rocker protection, Front/Rear Bumpers. ARB rear locker, 2" BL, Beefed up skid plates/trailing arms. Gen II uca, 2 Bouncy seats www.youtube.com/TagGeorge
|
|
|
Re: What I fopund when I took my front apart.
[Re: Tag]
#704703
03/09/06 10:27 PM
|
Joined: Oct 2003
Posts: 578
Rock Warrior
|
If I am hijacking then go ahead and flame me and call me dirty names but this reminds me of THE WORST PINION GEAR I EVER SAW (said with echo effect) ![[Linked Image]](http://pics.montypics.com/okred/2004-09-20/1095714896_dsc01779.jpg)
A brand spankin new 1973 series 3 Landy
OLIVE DRAB SWB, TURBO, IN ABOUT 36 PIECES
89 TROOPER, RESCUED FROM THE YARDS. (Down again)
05 TACOMA CREW SHORTY.
|
|
|
Re: What I fopund when I took my front apart.
[Re: Tag]
#704704
03/09/06 10:37 PM
|
Joined: Dec 2001
Posts: 11,727
Web Wheeler
|
That is not pretty, is there anyway to grease that bearing without taking in apart?
98 Montero with cold weather package
96 Toyota Land Cruiser, fully locked Mall Machine :-)
|
|
|
Re: What I fopund when I took my front apart.
[Re: OKRED]
#704705
03/09/06 10:54 PM
|
Joined: May 2000
Posts: 6,132
Trail Leader
|
If I am hijacking then go ahead and flame me and call me dirty names but this reminds me of THE WORST PINION GEAR I EVER SAW (said with echo effect) No flames.... Unless you post 3 pics of your youngest child, two of you Muscle car and 17 of your dogs. <img src="/forums/images/graemlins/smile.gif" alt="" />
87 Turbo Intercooled Raider, roller cam, torsen rear diff, LSD front diff, lockup auto with modified converter, V6 brakes, low transfer case gears...
|
|
|
Re: What I fopund when I took my front apart.
[Re: Kevin C]
#704706
03/09/06 11:24 PM
|
Joined: Oct 2003
Posts: 578
Rock Warrior
|
<img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" />
Now that was funny!
A brand spankin new 1973 series 3 Landy
OLIVE DRAB SWB, TURBO, IN ABOUT 36 PIECES
89 TROOPER, RESCUED FROM THE YARDS. (Down again)
05 TACOMA CREW SHORTY.
|
|
|
Re: What I fopund when I took my front apart.
[Re: OKRED]
#704707
03/10/06 03:05 AM
|
Joined: Oct 2004
Posts: 6,332
Trail Leader
|
If I am hijacking then go ahead and flame me and call me dirty names but this reminds me of THE WORST PINION GEAR I EVER SAW (said with echo effect) We actually have a worse one at the shop right now. I mean we still have the pinion. The truck it came out of is long gone. <-------------------------------------------------------------------------------------------------------> BobShaw used delrin bearings to replace those. Hopefully he'll post up where to get em'. I pm'd him many months ago about them and he never got back to me. Clay
1990 Montero RS (In pieces... for now)
KG6VNX
|
|
|
Re: What I fopund when I took my front apart.
[Re: 52degrees]
#704708
03/10/06 09:26 AM
|
Joined: Aug 2004
Posts: 1,997
Body Damage is Cool
|
Ok. Tag was your axle bounching and banging around in there? I belive mine are gone as well.
|
|
|
Re: What I fopund when I took my front apart.
[Re: Tag]
#704709
03/10/06 12:31 PM
|
Joined: Nov 2002
Posts: 4,127
Roll Me Over
|
Welcome to the club, Tag! <img src="/forums/images/graemlins/kewl.gif" alt="" /> ![[Linked Image]](http://home.earthlink.net/~iamjackshead07/FrontEnd022504%20-%20019a.jpg) ![[Linked Image]](http://home.earthlink.net/~iamjackshead07/FrontEnd022504%20-%20020a.jpg) <img src="/forums/images/graemlins/barf.gif" alt="" />
|
|
|
|
