Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Front Solid Axle Conversion #704932 03/10/06 10:29 AM
Joined: Mar 2006
Posts: 10
B
bjopii Offline OP
Need a Spot
Hello I was wondering if anone could help me. I'm looking for a front solid axle conversion for my isuzu trooper 90 model. do anyone know where i can get this???

Re: Front Solid Axle Conversion [Re: bjopii] #704933 03/10/06 01:52 PM
Joined: Oct 2001
Posts: 4,016
strawmyers Offline
Isuzu Moderator
It's really just a matter of gathering all of the individual parts it will take to achieve the particular set-up you want. There's a dozen or so different suspension designs just off the top of my head. www.independent4x.com carries a lot of the brackets, plates, and steering stuff to do a SAS. Do a search in these Isuzu forums for +SAS and set the time back to 4 years and you'll have plenty of reading to keep you busy for awhile. Good luck <img src="/forums/images/graemlins/kewl.gif" alt="" />


Sean Strawmyer
Back and ready to rock...... crawl.

From Indiana or surrounding states and interested in wheelin'? Check out www.mwior.com

Re: Front Solid Axle Conversion [Re: bjopii] #704934 03/10/06 02:08 PM
Joined: Sep 2000
Posts: 4,277
RobG Offline
Roll Me Over
you won't find an all-in-one kit for Isuzu SAS. You can either pay a fab shop to do the research and work for you... or if you plan on doing it yourself, I suggest you hit the search feature... you'll find plenty of info out there.

-Rob

Re: Front Solid Axle Conversion [Re: bjopii] #704935 03/10/06 08:21 PM
Joined: Mar 2002
Posts: 427
spacecab90 Offline
Mudrunner
You can start with this thread, this is where i have been going for the past 5 months while doing my SAS.

http://www.4x4wire.com/forums/showf...&fpart=1&vc=1#Post770115

Peace
Joel


1990 Isuzu Spacecab, SAS 95% done

'06 Nissan Sentra SE-R Spec V
Re: Front Solid Axle Conversion [Re: spacecab90] #704936 03/11/06 03:40 AM
Joined: Jan 2003
Posts: 551
R
Rodeo Clown Offline
Rock Warrior
PM 4WDJOE here on the forum. He has done one on an early trooper and has some stuff he gathered for doing his second one which is being parted(SAS stuff not the trooper). He would be able to hook you up with what you need to get a SAS done but you will need to be able to cut, grind, and weld to do it or have a buddy that can. <img src="/forums/images/graemlins/kewl.gif" alt="" />


1997 Isuzu Rodeo - Auto - 31" ATs
1995 Honda Passport - 1 tons - 39" Boggers







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.6039 MB (Peak: 0.6692 MB) Data Comp: Off Server Time: 2026-06-17 05:47:54 UTC
Valid HTML 5 and Valid CSS