Question about rocker shafts and arms

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Question about rocker shafts and arms #705125 03/10/06 09:20 PM

Joined: Jul 2004

Posts: 72

Pueblo, Colorado

Volcom

Getting the Wheeling Fever

Are there any differences between the rocker arms and shafts from an 84 22R vs. an 85 22RE? I need to either take them out of my 84 or 85 and I need to know which 4Runner to start yanking the motor out for my rebuild

Also, what's the best way to clean up the rocker arms. I don't plan on buying new ones with my new EB 268 cam. I've heard emory cloth on the arms?

Entire Thread
Subject	Posted By	Posted
Question about rocker shafts and arms	Volcom	03/10/06 09:20 PM
Re: Question about rocker shafts and arms	engnbldr	03/11/06 06:05 PM
Re: Question about rocker shafts and arms	Volcom	03/13/06 06:06 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.592s Queries: 15 (3.490s) Memory: 0.5964 MB (Peak: 0.6294 MB) Data Comp: Off Server Time: 2026-06-06 01:35:46 UTC
Valid HTML 5 and Valid CSS