|
|
 brake upgrade
#705545
03/12/06 09:21 AM
|
Joined: Jun 2005
Posts: 369
OP
Mudrunner
|
i have a 85 4runner and i want to get the new rotors but i want to try to get them here not off of marlins page. what model are they for? fj what? what years too. thanks
toyotas look good with body damage
|
|
|
Re: brake upgrade
[Re: toyotaguy55]
#705546
03/18/06 08:00 PM
|
Joined: Jun 2005
Posts: 369
OP
Mudrunner
|
bump comon some one must know? <img src="/forums/images/graemlins/confused.gif" alt="" />
toyotas look good with body damage
|
|
|
Re: brake upgrade
[Re: toyotaguy55]
#705547
03/18/06 08:56 PM
|
Joined: Apr 2000
Posts: 4,230
Roll Me Over
|
The ones I have on mine are of an 81 FJ. I got them at NAPA
David Fritzsche
1990 Ex-Cab V-6,5-speed, with a few mods
04.5 CTD Dodge 2500 Ram--Tow Rig
Roseville, CA
"Serenity through Sobriety"
|
|
|
Re: brake upgrade
[Re: OOP'S]
#705548
03/18/06 11:15 PM
|
Joined: Jun 2004
Posts: 435
Mudrunner
|
last i checked the right ones were 39 bux each at marlin.
87 4runner 33" bfg mt's no lift. dubbed the marine by my frinds. dead as of august 14 2005. 84 ex cab p/u 33"a/t, 3" suspension+3"bodylift, thorley header and 2.25xhaust, downey midrange cam+rocker set, very milled head! NO RUST!
|
|
|
Re: brake upgrade
[Re: toyotaguy55]
#705549
03/19/06 12:07 AM
|
Joined: Feb 2001
Posts: 1,681
Body Damage is Cool
|
ARe you talking about rotors for the vented rotor/IFS caliper swap ?
If so, 81-83 LC rotors from nearest parts store.
Middle of the road decent ones are around $50 ea, cheap Chinese around $30, real good $70
- seen in FOUR WHEELER mag July 2006 & OFF-ROAD mag Feb 2007 -
'84 4Runner ARBed 5.29s F&R,4.7 & 2.28 t-cases,hy-steer,BudBuilt skid,30spl Longs,36" TSLs,Chevys
'83 P/U, Buick 231 V6,Holley 4 bbl,Weiand intake,Downey headers,TH350 w/700R4 gearset
|
|
|
Re: brake upgrade
[Re: fourwd1]
#705550
03/19/06 12:09 AM
|
Joined: Apr 2004
Posts: 2,010
Body Damage is Cool
|
can you use ifs calipers when you do a sas?
87 22R PU, 2? body lift, 33? BFG muds, 4.88's, F&R Lock-Rights, Rancho Shocks, EB's Street RV Head w/ 268 Cam, LCE Header, 2" to 2 1/4" exhaust, Flowmaster 50 series, Magnaflow high flow cat, complete Herculined SR5 interior, V6 BB, MC, and calipers.
|
|
|
Re: brake upgrade
[Re: 87Toy4x4]
#705551
03/19/06 03:24 AM
|
Joined: Apr 2000
Posts: 4,230
Roll Me Over
|
Yes, that is why you get the FJ rotors. The IFS rotors will not work. There is a way you can make them work, but I do not like the way it is setup. The guys that have done say it works fine, but it looks like booty fab to me and a bit on the un-safe side. That is my opinion and Marlin shares the feeling with me.
Last edited by OOP'S; 03/19/06 03:25 AM.
David Fritzsche
1990 Ex-Cab V-6,5-speed, with a few mods
04.5 CTD Dodge 2500 Ram--Tow Rig
Roseville, CA
"Serenity through Sobriety"
|
|
|
Re: brake upgrade
[Re: 87Toy4x4]
#705552
03/19/06 07:54 PM
|
Joined: Feb 2001
Posts: 1,681
Body Damage is Cool
|
The LC rotor and IFS caliper is a bolt-on swap onto a solid axle.
The vented rotor and V6 IFS caliper is a big improvement over stock solid axle brakes.
- seen in FOUR WHEELER mag July 2006 & OFF-ROAD mag Feb 2007 -
'84 4Runner ARBed 5.29s F&R,4.7 & 2.28 t-cases,hy-steer,BudBuilt skid,30spl Longs,36" TSLs,Chevys
'83 P/U, Buick 231 V6,Holley 4 bbl,Weiand intake,Downey headers,TH350 w/700R4 gearset
|
|
|
|
