Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
When to worry about low compression #'s. #706038 03/13/06 11:58 PM
Joined: Jan 2006
Posts: 32
Jickle Offline OP
Getting the Wheeling Fever
I have a 92 xtra cab, auto, 4x4, with the 3.slow. 203,000 miles and I was checking compression numbers the other day on all the cylinders. I get:

#1 - 140
#2 - 142
#3 - 140
#4 - 145
#5 - 138
#6 - 142

Toyota specs, I think, says minimum psi is 142. Power in the engine is okay, nothing impressive. What is the lowest compression numbers I can tolerate? Will fuel economy, and power and performance all go down the drain soon? (The engine has been run out of oil once, and not by me)

Re: When to worry about low compression #'s. [Re: Jickle] #706039 03/14/06 12:07 AM
Joined: Jun 2003
Posts: 3,576
engnbldr Offline
Roll Me Over
*****
Quote
I have a 92 xtra cab, auto, 4x4, with the 3.slow. 203,000 miles and I was checking compression numbers the other day on all the cylinders. I get:

#1 - 140
#2 - 142
#3 - 140
#4 - 145
#5 - 138
#6 - 142

Toyota specs, I think, says minimum psi is 142. Power in the engine is okay, nothing impressive. What is the lowest compression numbers I can tolerate? Will fuel economy, and power and performance all go down the drain soon? (The engine has been run out of oil once, and not by me)


>>>*Those readings are pretty typical of what we see reported with the mileage you have. I wouldn't be very concerned, you might consider readjusting the valves as when we see #5 or #6 begin to drop, a burnt valve is the usual reason....*EB


*Beats the he** outa me!....*LOL**...
Re: When to worry about low compression #'s. [Re: engnbldr] #706040 03/15/06 08:20 AM
Anonymous
Unregistered
I don't think those numbers are anything to worry about <img src="/forums/images/graemlins/kewl.gif" alt="" /> i do compression tests on vehicles all the time in automotive class and thats about right. though i would keep an eye on #5

Re: When to worry about low compression #'s. [Re: Jickle] #706041 03/15/06 03:44 PM
Joined: Jan 2006
Posts: 32
Jickle Offline OP
Getting the Wheeling Fever
Great, thanks for the input fellas. I'll just run her like a toyota and keep checking the #'s. I just got a new pitman arm and idler arm and that truck really rides smooth, and straight. I used to have some pretty bad shuddering at higher speeds. Toyota kicks a$$


stock 92 pickup, v6, xtra cab, 4x4 IFS, 204k miles

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.009s Queries: 15 (0.007s) Memory: 0.5970 MB (Peak: 0.6558 MB) Data Comp: Off Server Time: 2026-11-16 10:25:35 UTC
Valid HTML 5 and Valid CSS