Toss on a crockpot, order a pizza, and leave the beer on ice until yer done.

Unwrap the fuel harness and get rid of those gawdawful splices, and solder 'em for the injectors.

Freezer tape and sharpie. Mark your stuff. Got a digi? Take pix. Save beverage box cardboard to punch bolts into, and mark which assembly they're for. Stick a piece of paper and a pencil under a wiper and write down your 'gottas' when you need to go back and look at something.

Make sure the new engine turned to TDC for stabbing the distributor back in.

Jump the engine out with the oil pan on it; you can remove it while it's in the air.

Brake fluid for rebleeding the clutch. May as well flush everything good while it's torn down. Remember to adjust.

Could go on, but you can post a new q. when you get started.