for along time I have worked on this motor, 3 or 4 k on the rebuild.
20 over on pistons
head shaved a bit not much just to make sure it was flat.

going out to shovel snow will see if the build sheet is still in the glove box.

larger valves from engine builder
injectors cleaned and tested
timing is dead on
DOA rv cam
arp rod bolts
balanced and blue printed
new fuel filter
ceramic header
2.25 inch exaust, cat and muffler
center force 2 cluch. (heavy)
stock is supposed to be around 100 hp. I thought with all that I did on the rebuild that I would be any where from 125 to 150 hp. going up a hill climb yesterday with a bit of a run to the floor in first gear high range 4x4 it just ran out of power an died.

any toy tricks that I am missing. I am still looking for a 1982 celica mass air flow meter. It is 3 inch vs the 2.5 inch of the pickup one.
I have also disconnected my snorkle and that didn't make any difference.