If this is your first time pulling a tranny, I doubt you will have it all done in one day. It is possible, but unlikely. It doesn't take much to slow you down, not having the right tool, a stuck bolt you can't break loose.

I did mine in a weekend plus when I changed the clutch. Seperating the tranny from the block was kinda a *****, as was lining it back up.

I'm not trying to discourage you from doing it yourself...you most definitey should. I'm just telling you to plan on it taking a little longer so you don't get into touble and stress out.

By the way, you should consider changing the clutch while your in there unless it's been done recently. You have already done all the labor at that point.