|
|
|
|
 FJ80 rod ends?
#709080
03/23/06 02:41 AM
|
Joined: Jul 2005
Posts: 232
OP
Wheeler
|
my question is will the FJ80 tie rod ends that marlin sells fit a stock tie rod from an 84' pickup? it says that they are used on cross over set ups on pickups and 4-runners, but it also says that the threads are up to 6mm larger in diameter then stock. does this mean you have to order one of their tie rods to use these ends or will they fit a stock tie rod? i would e-mail marlin directly but for some reason my computer wont let me.
thanks,
jared
87' ext cab toy
|
|
|
Re: FJ80 rod ends?
[Re: lethe]
#709081
03/23/06 02:43 AM
|
Joined: Nov 2000
Posts: 4,192
Toyota Moderator
|
does this mean you have to order one of their tie rods to use these ends or will they fit a stock tie rod? They will not fit the stock tie rod, they are larger. You will need to order stock replacements or get a new tie rod.
|
|
|
Re: FJ80 rod ends?
[Re: DirtyHarry]
#709082
03/23/06 03:00 AM
|
Joined: Jul 2005
Posts: 232
OP
Wheeler
|
where can you order stock replacements from? thanks for the quick reply
87' ext cab toy
|
|
|
Re: FJ80 rod ends?
[Re: lethe]
#709083
03/23/06 03:10 AM
|
Joined: Jul 2005
Posts: 232
OP
Wheeler
|
nevermind, napa has em' for $32
87' ext cab toy
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.007s Queries: 15 (0.005s) Memory: 0.5975 MB (Peak: 0.6531 MB) Data Comp: Off Server Time: 2026-10-24 08:27:30 UTCValid HTML 5 and Valid CSS 
