I own a 92 pickup, 203k , v6, xtra cab auto.

The check light did not come on, just when I jumped the connectors. I got a code 14 when not running and running.

I read in the forums to check the voltage between E1 and Ig connectors and I got a 13.5v reading. (It should be between 0.7 and 1.0 v I believe)
I then checked the specs on the igniter and found out something interesting. I tested the igniter about 20-30 minutes after driving the truck and it says the ohm should be within .45 - .66 ohms when hot. Cold was like .33 - .55ohm I was getting a fluctuation between 0.4 to 0.9 ohm and even 1.0 once. WHAT THE HECK ? Should I replace the igniter?

The engine runs fine, except for a slight hesitation when starting. There is a slight variance in the rpm when idling. What should I do, the voltage is WAY off of what is should be. The engine has never stalled on me.

Thanks ahead of time !


stock 92 pickup, v6, xtra cab, 4x4 IFS, 204k miles