Hey so i worked on the motor mount issue, thanks to everyones help, it all seems to come together nicely. However, i seem to have misplaced 2 of the power steering hoses in the midst of all the conversion. the steel loop hose that passes behind the air conditioning unit, and the hose that plugs into the back of the pump itself(hose #3 in diagram), coming from the steering gear box. I have both the rubber hoses that come from the reservoir but i do not have either of the hoses that plug into the gearbox. The gas steering components wont work as the pump was located on the opposite side of the engine and had no loop cooling(?)hose. So i guess the question is whether are not the extra length of steel hose is required, or can i just run the hose from the reservoir directly to the gear box? Aside from that, if anyone could help with locating/pricing/naming these hoses so i can find them would be incredibly helpful. Here is a diagram for ease of recognizing the components i am talking about.

Thanks in advance!